Executive Stainless Steel products consist of high quality solid wires, flux cored wires and coated electrodes, all with excellent operator appeal.
The executive line of Stainless Steel
Download
Product Catalog
Executive 410NiMoP is an all-position gas shielded flux cored wire that provides superior weldability, low spatter and smooth beads with easy slag removal. This an easy to use wire that helps minimize post weld clean – up. Designed to be used with Argon/CO2 shielding gas (75-80% Argon, balance CO2)
Application and Features
Executive 410NiMoP is used in fabrication and repair of hydro turbine runners, as well as welding CA6NM castings or similar metals.
Typical Wire Chemistry and Mechanicals
| C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
|---|---|---|---|---|---|---|---|---|
| 0.02 | 11.87 | 4.68 | 0.50 | 0.30 | 0.25 | 0.01 | 0.01 | 0.10 |
| Tensile Strength: | 113,100 PSI min | Elongation: | 25% |
Typical Welding Parameters
| Diameter | Voltage | Amperage | WFS (in/min) | Shielding Gas* |
|---|---|---|---|---|
| .045" | 24 | 130 | 225 | 100% C02 or Ar + 20-25% C02 |
| .045" | 27 | 175 | 320 | |
| .045" | 30 | 240 | 530 | |
| .062" | 27 | 195 | 152 | 100% C02 or Ar + 20-25% C02 |
| .062" | 31 | 260 | 260 | |
| .062" | 34 | 320 | 360 |
*Shielding gas flow rate 35 to 50 CFH. For 100% CO2 use two volts higher than shown
Standard Packaging
| FCAW | 33-lb plastic spools | 1,980-lb pallet |
Classification
AWS/SFA 5.22, Class E410TNiMoT1-1/4
